.
.
Product Information.
There is a new device on the market that not only allows you to save on electricity bills, but also stabilizes the electrical flow, thus reducing fluctuations in it, thus avoiding damage to electrical appliances.
In the home, the high-low electrical frequency alters the use of electrical appliances during the day and night. This new type of product was designed for this situation.
It is composed of a high and low frequency online network filter, through its performance: it allows to significantly improve the use of energy, input power, input current, energy efficiency, energy factor, and other performance indicators for the air conditioning, refrigerator, current inrush control, voltage pulsations, and high-low frequency harmonic maintenance.
The equipment protects household appliances by maintaining high-low voltage stability and current variation of relatively different size, achieving energy savings, protecting the environment and the appliance.
Does not consume electrical energy.
Operating principle.
Alternating current is transmitted as a sine wave.
The waves that are generated in the plants of the generating companies are transmitted through the power lines and reach the point of consumption with certain deformations due to different electrical disturbances that originate in part in the distribution process itself, and in part by the influence of the different final consumers. The wave that the final consumer receives in most cases, presents deformations in the form of peaks and valleys of higher and lower voltages, respectively. These peaks produce heating in the devices that are connected and consequently increase the cost of maintenance, increase the electricity bill and reduce the useful life of the device.
The electrical energy economizers reduce or eliminate the disturbance effects described in the sinusoidal wave of the electrical voltage, allowing the accumulation of energy for 10 seconds and therefore keeping the voltage constant when peaks or drops occur. This process provides the necessary reactive power to establish the electromagnetic field in the motor winding and at the same time recovers and reuses the energy during the normal work cycle.
Its use is very easy, you just have to connect the energy saver to a socket in your home or premises.
One of the devices (if there is more than one) should be plugged in as close as possible to the electrical panel, the second anywhere in the house where there are electrical appliances.
Does not need maintenance.
With regard to the number of devices to use, there are brands that calculate it based on the surface to be covered, and others based on electricity consumption:
Surface to cover:
If it is a normal home up to 100m2 – 1 saver.
If it is a home with more than 100m2 – 2 savers.
If it is a house with several floors – 1 saver per floor.
Electrical consumption:
If the monthly consumption is up to 500kwh – 1 saver.
If consumption is greater than 500kwh – 2 savers.
Duration
The manufacturers indicate that the useful life of the device is around 80,000 hours.
Saving
All tests, trials and verifications show results of up to 35% savings in electricity consumption. However, the laboratory conditions in which the tests have been carried out are not the real conditions of a home.
From the study we have carried out, we have come to the conclusion that the real savings that can be obtained with this element is up to 15%.
Approximate dimensions
Height: 10cm
Width:7cm
deep: 8cm
Weight: 0.5kg
Summary of benefits
Savings in electricity consumption.
Protection of household appliances and electrical appliances.
Very small size (could go through an electric air freshener).
Long duration of the useful life of the component.
Affordable price.
.
