In homes, there are always a lot of improvements and small repairs that, due to their low complexity, do not require any kind of technical knowledge, so they can be carried out by anyone who is fairly handy.
However, the main problem It causes us to underestimate ourselves, it is the fear of the unknown. Fear of not knowing how to complete the repair.
Well, along these lines, and with the aim of gradually discovering the simplicity of many of these jobs, today we bring you this simple and very useful home DIY tutorial. We will show you, in a practical way, how the disassembly is carried out, greasing of locks of interior doors, also called interior doors, and their subsequent assembly.
Set-up and greasing of door locks.
Why lock greasing?
We have decided on this topic since, over time, door knobs and slips begin to creak and, what is worse, they harden, making such a simple operation as opening and closing a door quite uncomfortable. gate.
Well, this “problem”, which we will run into sooner or later, we can solve quickly and easily.
Necessary materials
To carry out the fine-tuning of the locks on passage doors, we will only need three things, actually there are two:
- A screwdriver, either manual or electric.
- About 10 minutes of time, or even less.
- And a good lubricating oil, such as WD-40 multi-purpose oil.
How to grease door locks
Disassembly of the lock
As we want the repair well, so that it lasts longer in good condition, the first thing we have to do is disassemble the entire mechanism. Only in this way can we grease it in depth.
Therefore, we will start by removing the lock screws, which are located on the edge of the door.
Disassembling the lock on and the handles in poor condition.
Still, having removed these screws, the mechanism cannot be removed until we disassemble the knobs. Therefore, we also remove the screws from both sides of the door.
We remove the knobs.
We take out the square rod that connects the whole assembly.
And now yes, we can remove the slip along with the mechanism.
Cleaning of the different elements
If we look at the interior pieces that we have disassembled, we see that they have a very fine metallic dust of a dark color.
This residue originates from the friction produced between the different components of the lock when they are not properly lubricated.
Eliminating the residues produced by the friction between the different elements, due to poor lubrication.
Before re-lubricating, it is necessary to remove all these remains. So we must clean all the elements well. For this we can use a degreaser, a little solvent or even a simple lint-free cloth. Or, better yet, the WD-40 multipurpose oil itself, since this product, in addition to lubricating, also removes dirt.
lock greasing
For him greasing of locks, it is important to choose a good lubricating oil, in order to optimize the operation of the mechanism. Therefore, once all the components have been thoroughly cleaned, we apply a good lubricating oil, such as the WD-40 multipurpose oil.
Lubricating the various components with WD-40 multipurpose oil.
This brand includes a “1-click” dosage change system. With a simple and comfortable movement we go from the standard diffuser to the localized application cannula.
Therefore, we spray the most intricate and interior areas with the localized application system, and the rest with the standard diffuser.
Quick change system for the different WD-40 multipurpose oil application systems.
WD-40 “Mythical Routes” Contest
Behind this brand there is enormous experience, knowledge, and investment in R&D. In another article I will tell you a little about their origins, in this way you will understand that they are leaders in their sector. But for now what I will tell you is that WD-40 has just launched the “Mythical Routes” contest.
The Grand Prix is…Route 66.
In the upper corner you have the QR code to visit their contest page, by scanning it with your mobile phone, or you can also do it by visiting their website rutamiticas.wd40.es/BricoBlog.
QR code
If you prefer, you can scan the QR code above with your mobile phone to access the contest website.
Read the rules of the contest, and participate!
You know why?
Because you can win, among many other prizes, a trip With whoever you want along the mythical Route 66valued at €7,000, in addition to gasoline checks either Ruralka getaways !!!
Reassembling the lock
Well, once all the components have been generously greased and the excess has been removed with a cloth, all that remains is to reassemble the lock.
We put the body in its location, and screw it.
We introduce the square rod.
Reassembling the lock, once cleaned and lubricated.
We put the handles on both sides of the door, and screw them.
Result of lock greasing
As you can see in the video that I include below, the before has nothing to do with the after. The door closes by itself and without any creak.
If you carry out the maintenance of the doors in the indicated way, you guarantee a perfect operation for many years.
Video tutorial of the complete process
As usual, whenever possible, we accompany our tutorials with an explanatory video to make it as easy as possible for our followers. At least that is our intention.
If after watching the video, you still have any questions, or you need to ask us something, all you have to do is leave us a comment on this article or on the video itself. We will try to help you as soon as possible.
If you ask where to get this multipurpose oil, you can consult it by following this link WD-40.
Have you ever oiled a lock? Do you see yourself capable of doing it?
Leave us a comment, telling your opinion and/or experience.
.
