Would you like to have more privacy in your home, but without losing light? Do you want to know how to save on curtains and blinds without having to change the windows? With this guide and tricks to install frosting vinyl You will see how simple and fast it is to be safe from the eyes of your neighbors.
The icing or frosty vinyl it is usually placed on glass or crystal to provide greater privacy. Its main characteristic is that it allows light to pass through, but it does not allow you to see what is inside, even if the room is illuminated.
For this reason, it is very useful for windows that overlook community patios or those of the bathroom, as well as in shower screens or partitions in offices, in shop windows, etc. In addition, it has a highly resistant adhesive that allows it to be installed both on the inside and on the outside, even if it is outdoors.
What is needed to install frosted vinyl?
To install frosted vinyl you will only need the following tools and materials:
- Frosted vinyl. Acquire the meters you need taking into account the height and width of your windows
- Spatula for placing the vinyl and not damaging it
- Spray bottle with water and a little dishwashing liquid
- cutter and scissors
- Rag
How to install frosted vinyl on glass
Since you will buy after watching the following video tutorial, you don’t need to be a professional to install frosting vinyl in your home or business.
In summary, the steps to follow are the following:
- Clean the window with water and a splash of dish soap or baby shampoo.
- Measure the glass and cut the vinyl so that there is a two-centimeter margin on each side.
- Peel off a strip of the backing paper a couple of fingers wide and stick it onto the glass.
- Spray the surface with soapy water so that the glass is completely soaked.
- With one hand remove the protective paper and at the same time slide the spatula with the other hand. Do not be in a hurry, doing it little by little is one of the secrets to achieve a good result.
- With the cutter cut the excess part and pass the spatula again to remove the water.
Final advice and recommendations
if you follow these recommendations and tips you will get the privacy you need without losing any light and with a perfect finish:
- Do not use glass cleaner, ammonia or vinegar to clean the window, as it can encourage the appearance of bubbles.
- If the surface on which you are going to place the vinyl is very large, it is better to do it with two people.
- Keep in mind that if you have any small bubbles left behind, they will most likely be reabsorbed once the soapy water has dried. If the next day it is still there, prick it with a needle and pass the spatula again.
Did you know this type of translucent vinyl for windows and partitions? I hope this guide and tricks to install frosting vinyl It has been useful to you. By following the tips and tricks indicated therein, you will achieve greater privacy with a perfect finish.
If you liked this post, you can see many more guides on DIY and decoration at . Thank you very much for commenting and sharing!
