Among the essential tools to carry out all kinds of work on materials such as marble, stone, ceramics, granite and quartz, the grinder is one of the most prominent.
The possibility of cutting ceramics with a grinder, cut marble with grinder and even use a wall cutting grinder, just to mention some of the tasks that you can perform with this tool. It is its versatility that makes it an essential element in any workshop, where its use is strictly professional, however, it also has application in non-professional areas, to use it in DIY tasks for example.
What interests us is to discover what is a grinder and what is it foralthough perhaps the first part of this question is obvious and perhaps we will concentrate more on the what is a grinder for.
mini grinder
The grinder, its discs and its uses
In principle, we can say that a grinder is a tool electric and manual. It is made up of a high-power electric motor, connected by means of reduction gears or directly to the motor shaft. Precisely at the tip of the shaft, it is where the disc is attached.
Grinder discs
When we talk about the discs for grinderwe refer to a key accessory for this class of tool, since for example, when you use a diamond disc for grinder or when you use polishing discs grinder, in reality, you are working with a specific objective. And this is due to the fact that depending on the task to be carried out, that is, the specific objective that you have to achieve, it will be the disk that you will choose to carry it out.
In other words, to think of the grinder without the right wheel for the task is to have a job half done.
Uses of a grinder
What we can distinguish at first sight if we make a classification of Insemac grinders, is that there are the mini and the big ones. The former use 115mm or 125mm discs and the latter 230mm discs.
Mini grinders – small diameter disc grinders
And knowing this is important, because to a large extent it will be on this that your choice will depend when acquiring one or another tool to carry out your work.
Suppose the task you have to perform, either cutting, polishing or grindingyou have to develop it on a very small surface or on softer materials, because in that case, perhaps the best alternative would be to opt for a mini grinder. These are also ideal for subtle work and finer cuts.
On the other hand, larger grinders, those that use a 230.mm disc. They are very useful for working on larger and harder surfaces. Hence, these are the ones that are most used in professional fields, since they allow much cleaner and straighter cutsresulting in a much neater finish.
Large diameter disc grinder
Always bearing in mind the importance of safety when working with grindersthere is no doubt that these are constituted as allies for any worker of the stone and ceramics industry.
Learn more about tools for marble, stone and ceramics. We teach you the best ways to cut stone, cut marble and cut ceramics.
Now you know what a grinder is and you have the opportunity to know those tools that work best to cut each of the materials… Shall we apply it?
