Pink or Pink is a simple color to prepare, which requires only two colors to obtain a good result. Here is a complete guide that will help you get different shades of pink mixing paint colors of any type.
How to prepare pink paint
Basically Pink is obtained by mixing Red and White in the same or different proportions. The more white paint in the mix, the lighter the Pink will be. On the contrary, the more Red is added, the result will be a very strong Pink close to a reddish hue.
You should keep in mind that Red paint is very Invasive, so you will need to add in small amounts on the white base, and mix properly. If you still want a more intense color, repeat the process, but always dosing the Red little by little.
Pastel or Soft Pink
Pastel pink is nothing more than a pale pink, which has very little red in the mix. To get a color of these characteristics you will have to use more white paint and a pinch of red. The lower the amount of Red… the Pink will be softer.
Pale Pink or Old Pink
These shades simulate to be an aged or dirty pink color. To obtain it you will need to add the color Black to the traditional formula. That is The rosewood or old is formed with White, Red and Black, the latter in very small proportions. If you add too much black the color will take on a grayish cast. You can replace black with Brown color.
Fuchsia
We are in the presence of a vivid pink color and something difficult to obtain. You can prepare a Fuchsia Pink by mixing Red + White + Blue, the latter in a small proportion. Otherwise you could get a mauve or lavender hue.
Remember that the preparation of very intense shades is not possible, since special bases and precise combinations are needed. So you should buy the Fuchsia paint already prepared if you want a strong hue.
Salmon Pink and Peach
Salmon, Peach and even Coral colors are shades of the same family, and can be formed with the same paint colors. To the previously seen formula of Red + Whiteyou can add a small amount of Yellowuntil you get the coloration you need.
Pink paint to paint walls
To do this you will need a base of traditional white, acrylic or latex paint. And to give it some color you will have to use Toners, Dyes or Colorings for water-based paint, or universal. The color you will need can be found as Red or Vermilion.
To avoid inconvenience, prepare only a small amount, it can be a liter. Add the dye little by little, and mix with the help of a mixer or simply a wooden board of the appropriate size. Add more stain if you want a more intense hue, always stirring the paint constantly and thoroughly.
An alternative to stains or toners is a traditional red paint, the same type as the White primer. Gradually add the Red paint over the White paint, until you get the desired shade.
