In this article we will see the different options of motors for domestic blinds, how to mount them, and what must be taken into account for their choice, purchase and assembly.
The shutter motor, in addition to providing comfort, also provides an extra level of anti-theft security. Since depending on the model, we can program weekly, or on the go through the Smartphone, the openings and closings of the blinds. Very interesting aspect, facing the seasons in which the house is uninhabited, such as on vacation, to dissuade as much as possible the access of possible intruders.
The installation of a motor for domestic blinds, does not have major complications, in addition you always have the technical advice of the selling company.
Types of motors for domestic blinds
There are basically two types of motors. The mechanical limit switch, and the electronic one.
The limit switch is the limit position for the shutter to rise and fall. Well, in the first it is programmed by means of a rod, manually. In the electronic one, it is programmed with the control and a button.
On the other hand, there are two types of engines.
There is the conventional one, which are the ones that the mechanism uses a push button. And the motors for blinds with remote control, which can be activated by remote control, or via Wi-Fi if we mount the Smarthome. For the use of this accessory, the engine has to be an A-OK.
The installation of the latter is simpler since it is not necessary to mount the button.
Aspects to consider
When buying a domestic blind motor, you have to take into account some aspect than another.
blind weight
We have to take into account the weight of the blind, since the power of the motor will depend on this.
To determine the engine power, you must provide the selling company with the following:
- Height and width of the blind.
- The material of this, since depending on the material in which it is made, it will weigh more or less. Normally they can be made of PVC, wood, aluminum and extruded aluminum.
Measures
You should also take into account the width of the blind, that is, the length of the tube on which the blind is rolled. As well as the diameter of this tube.
The shutter pick-up shaft, which is located inside the shutter drum, usually has a diameter of 40mm or 60mm.
drawer type
You will also have to indicate to the selling company the type of drawer of your blind. They are usually of two types. The compact drawer, which is part of the closure. And the work box.
Type of motor
You must be clear about what you want. That is, if you want to operate the blind with a button, with a remote control, with the mobile in addition to the remote.
Depending on this choice, you will need one motor or another, as well as the SmartHome module.
How to motorize a blind
Next we will see how simple it is to motorize a blind. Or several.
Video-tutorial
In the following video you will find a complete and practical guide that will solve all your doubts when installing an automation for domestic blinds.
Parts of a blind motor
Motors for blinds are made up of the following elements:
- Tubular blind motor.
- A remote control or a push button, depending on the type chosen.
- A compact drawer side mount for the motor head.
- An adapter for an octagonal shaft of 40mm or 60mm, depending on which one our blind was mounted on.
- A rod for limit switch adjustment, in the event that the chosen motor has a mechanical limit switch.
- A user manual.
Below are all the necessary steps to carry out the motorization of a blind.
Removing the shutter
The first thing we will have to do is remove the collecting belt. To do this, we completely lower the blind and free it from the axis. For this, we have to remove the cover of the drawer, and remove the screw that holds the tape.
Then we also disassemble the tape collector.
And then we remove the octagonal axis.
Install the motorization kit
We screw the motor shaft support to one of the sides.
We assemble the components of the motorization kit, which includes the stops and bearings. And we introduce the whole kit inside the existing octagonal axis.
We place the motor already inserted, in the two lateral supports that are anchored inside the box of the blind. And we fix them with the included pins.
Make the electrical connections
To perform this step, before touching any cable, we must disconnect the power. In this way we will avoid possible unnecessary accidents.
The shutter motor must be connected to a power outlet. The connection is very simple. The blue wire we connect to the blue. The brown, with the brown. And the yellow and green, which is the one for grounding, with the yellow and green.
And we return to the current.
Finishing the installation
Before re-hooking the shutter to the shaft, it is advisable to test that it works correctly.
Next, and with the blind lowered, we fix the fastening straps.
The last step will be to regulate the stop for both the rise and fall of the blind. Depending on whether our shutter motor is with a push button or with a control, it will be done differently.
In the first case, the limit switch is adjusted by means of a rod included in the kit.
In the case of being with remote control, the regulation of the limit switch will be done with the control itself.
To finish, let’s put the drum lid back on.
It’s not too difficult, right?
In the event that you still have any questions to clarify, you can leave us a comment and we will try to clarify it for you as soon as possible.
.
